JSK SL

Advantages at a glance

  • Low weight
  • Suitable for all standard oval hole types
  • Optimum protection against corrosion thanks to E-coating

Comment

  • The JSK SL is not suitable for use in site traffic.
  • The load conditions apply for operation on paved roads and transport conditions typical in Central Europe.
  • Please enquire about uses other than these.

V = Sliding distance

Technical Data

Typ D value (kN) Imposed load U (t) Approval (ECE SL)
JSK SL 152.0 20.0 E1 55R-01 1151

Technical Specification

Suitable for 2“ king pins (G 50) as per ECE R55-01, DIN 74080, ISO 337 and steering wedges as per ECE R55-01, DIN 74085.

JSK SL

Item Description Remark Order No. per set
01 Fifth wheel coupling *   1
02 Split pin for JSK SLEOxxxxxx SK 3121-61 1
02 Split pin for JSK SLDOxxxxxx SK 2921-051 1
05 Split pin, kit   SLE 202210020 1
06 Bracing, kit   SLE 202120020 1
07 Stopper, kit   SLE 202520020 2
08 Lever, kit   SLE 202300020 1
09 Cylinder, kit for pneumatic version SLE 202410020 1
10 Pneumatics kit for pneumatic version V 1021-54 1
11 Pressure spring   SLE 201330020 2
13 Double tension spring   SLE 202610000 1
14 Traverse, kit   SLE 201380020 2
14 Reinforced Traverse, Kit Scania   SLE 201380320 2
15 Handle, kit H 173 for manual version SLE 202420020 1
15 Handle, kit H 203 for manual version SLE 202850020 1
15 Handle, kit H 220 for manual version SLE 202850020 1
15 Handle, kit H 263 for manual version SLE 202720020 1
16 Bridge, kit for manual version SLE 202770020 1
16 Bridge, kit for pneumatic version SLE 203300020 1


* Spare parts of fifth wheel coupling see JSK 37 E or JSK 36 D
The gear racks and the fifth wheel plate are not available as spare parts.

JSK SL Order key

Components and variants

Fifth wheel coupling JSK SL Mounting height Variants Handle/Maintenance Customer hole pattern (all KTL)
D0 = JSK 36 D (pressed steel) 32 = 173 mm 06 = Slider manual AA = Standard (without oval hole, no customer-specific pattern)
E0 = JSK 37 E (cast) 45 = 203 mm 07 = Slider manual / JSK 37 EW DR = DAF oval hole 880/M16/100/200
  54 = 220 mm D6 = Slider manual/ JSK 36 D + 3 sensors* CT = Iveco oval hole 860/M16
  73 = 263 mm T6 = Slider manual / JSK 37 EW / LubeTronic 1Point FV = Iveco oval hole 920/M16
    20 = Slider pneumatic CK = MAN oval hole 880/M16
    21 = Slider pneumatic / JSK 37 EW CN = RVI oval hole 900/M16
    I3 = Slider pneumatic / JSK 37 EW / LubeTronic 1Point DV = RVI oval hole 940/M16
    D5 = Slider pneumatic / JSK 36 D + 3 sensors EC = Scania oval hole*** 880/M18/reinforced traverse
    V2 = Slider pneumatic / JSK 37 E / 1 Sensor on Slider** BC = Scania oval hole 880/M18
    X6 = XXL Slider manual BD = Volvo oval hole 930/M12
    X4 = XXL Slider manual / JSK 37 EW / LubeTronic 1Point CB = Volvo oval hole 930/M14 Huckbolt
    X8 = XXL Slider pneumatic DF = JOST oval hole XXL Slider 880/M16
    X5 = XXL Slider pneumatic / JSK 37 EW / LubeTronic 1Point  

XXL-Slider only with “AA” or “DF” oval hole

Example of an order number – JSK SL DO 32 06 AA

Remote display

Order No. Description Weight (kg)
SKE 501620200 3-sensor display, 24 V (european Standard) 0,075
SKE 501620500 3-sensor display, 12 V 0,075

Cable set

Order No. Description Weight (kg)
SKE 002110200 ADR (for hazardous materials transporter) 1,85

Fleetmaster Handle

Order No. Description Weight (kg)
SKE 070616469 complete for slider manual 2,00
SKE 070616416 complete for slider pneumatic 2,00

Explanations

W = Low-maintenance version

Mounting kits

Customer hole pattern Order No. Quantity per SL
CT / FV SLE 000000120 1
CK SLE 000000120 1
CN / DV SLE 000000120 1
BP SLE 000000120 1
CP / DR SLE 000000120 1
DF SLE 000000120 2
BD SLE 000000320 1
EC / BC SLE 000000220 1
CB SLE 000000720 1


available with Sensoric LubeTronic 1Point

Delivery time on request (not all combinations are possible)


JSK SL

PDF-Downloads


Mounting and Operating Instructions
JSK SL 07/2017
 
Flyer
JSK SL The new slider 04/2008
Original spare parts Better safe than sorry! 09/2014
Original spare parts Better safe than sorry! 09/2016
Wear Limit Gauges 09/2016